Custom Interconnect Build Guide
This guide runs through every option available for our custom Interconnects.
Given the thousands of different variations we offer, it would take us a lifetime to build every one and take a photo to see what each variation looks like. Instead, we cover off each part to give you an idea of what you can expect.
First and most importantly, cables are sold as each. As there may be different requirements for each cable, we offer them individually.
All cables come with branding.
PLUG TYPE - END 1 & END 2:
Options: RCA Male, RCA Female, XLR Male, XLR Female
A typical subwoofer cable would be an "RCA Male" to "RCA Male". A standard XLR cable would be "XLR Male" to "XLR Female"
We intend on adding 1/4 and 6.35mm options in the future but we can make these work now so if you're chasing these other options, flick us an email.
PLUG RING COLOUR:
Options: Black, Red
This changes the indicator ring colour on each plug. Ideal for stereo set ups where you need to identify each end of a long run of cable.
LENGTH:
Options: 0.5m, 1m, 2m, 3m, 4m, 6m, 7m, 8m, 9m, 10m, 11m, 12m, 13m, 14m, 15m.
This is pretty simple. Pick the length you want each cable! You can select lengths up to 15m, however we can do any length you need. Simply send us an email on sales@nbspeakercables.com.au if you need lengths longer than 15m and we can do up a custom invoice.
NAKED OR SLEEVED:
Options: Naked or Sleeved
The Naked option leaves the cable as is so the colour will be the colour of the insulation which is Black and has manufacturer markings visible.
The Sleeved option adds a Techflex Sleeve to your cable. This adds a nice aesthetic touch to your cable with a colour of your choice.
The sleeve colours currently on offer are: Black, White, Red, Blue, Green, Black/Green and Red/Blue.
We are limited with custom colours at the moment as we don't have a local supplier of Techflex Sleeving and importing short lengths is extremely expensive but if you're super keen on a certain colour, flick us an email and we can look at your options.
PLUG TYPE - AMP END & PLUG TYPE - SPEAKER END
Options: Banana, Spade, Pin, Krix, Elitist
You have an option for each end of your cable as different equipment can have different requirements. Examples shown below are using our black sleeved 11 AWG cable.
And just like that, you have your fully custom cable!
WIRE SPECS:
- Wire Manufactured in Australia
- Cable Handmade in Australia
- 16/0.20mm (0.5mm) Copper Conductors
- 80% Copper Braided Screening
- Highly flexible 5V90 PVC Screening
- Overall Wire Diameter 5.6mm